Industry 

For a new generation of illuminated door sill trims for the new Audi C8, a new plant had to be developed which glues the sill trims pre-assembled by the operator and applies the decorative part.

Starting point

The plant works in two steps. In the first step, the pre-assembled assembly (only the light unit) is inserted by the first operator (always two at a time), who then fills in a UV adhesive to seal the sill trim. A label is then applied and the sill trim is removed by operator 2. The operator then places the sill trims in the second part of the machine together with the aluminium decorative sheets, which are then visible to the customer. The decorative sheets are glued to the sill trim with a hot-melt adhesive.

Solution

- The parts do not have to be glued manually
- Faster cycle time


Advantages for the customer

Machining centre for the automotive industry

montageautomation-led-lichtleiste-montage-robotik

large_00001-12896 led lichtleiste montage.jpg

medium_00001-12896 led lichtleiste montage.jpg

small_00001-12896 led lichtleiste montage.jpg

thumbnail_00001-12896 led lichtleiste montage.jpg

Connecting + Joining 

Dosing + Gluing 

Marking

Machining 

Testing 

We present an assembly plant for the automotive industry.

System film

A UV glue is filled into the inserted door sill trims. This glue is used to seal the edges and the electronics.

Adhesive station

Each sill trim is given its own serial number.

Labelling station

The UV extruders must be kept in their station so that the glue in the nozzles does not harden.

LED door sill trim

Automation

Unternehmen